Sistem Otomasi Untuk Menyortir Barang Pada Ruang Produksi Menggunakan Scada dan PLC

Automation System For Sorting Goods In The Production Room Using Scada and PLC

Abstract

The development of the industrial revolution is progressing. Especially on production performance or machine parts. Industrial revolution 4.0 uses the internet and digitalization. So there are lots of new innovations. In a large-scale company, of course there are many tools and machines that need to be regulated whether they are on or not with regular supervision. With regular supervision, it is impossible for human workers to check one by one, thereby wasting time and reducing production levels. Therefore, it is necessary to develop a control system using PLC and HMI (Human Machine Interface) as the brain or control center for the company. In the industrial sector, PLC (Programmable Logic Controller) is an important factor in the operation of automatic machines in factories replacing relay control systems. So that PLC as a control system in the industrial sector can move machines according to needs. One part of the industry is the production room. The production room is the part where there are manufacturing materials or goods up to packaging. This research aims to design and implement a PLC (Programmable Logic Controller) and SCADA by adding sensors and actuators as output. The method used is a rule base system, the system runs according to a predetermined sequence and flow. The results of this research are the  PLC, the SHT 20 temperature and humidity sensor can produce temperature and humidity values, the capacitive photosensor can detect items with 35 trials accurately but the distance is limited to only 27cm, the proximity sensor can only detect metal objects by attaching to the sensor and The actuator in the form of a stepper motor can run according to the commands given and is well integrated into the HMI (Human Machine Interface).